Oracle Cloud Infrastructure Documentation

FastConnect Metrics

You can monitor the health, capacity, and performance of your FastConnect connection by using metrics, alarms, and notifications. For more information, see Monitoring and Notifications.

This topic describes the metrics emitted by the metric namespace oci_fastconnect.

Resources: cross-connect groups, virtual circuits

Overview of Metrics: oci_fastconnect

Metrics are available for multiple resources in the FastConnect connection. The metrics help you determine quickly whether your FastConnect connection is up, how much data is flowing over the connection, and whether packets are being dropped for unexpected errors.

FastConnect offers different connectivity models:
  • Connect with an Oracle partner: Metrics are available for virtual circuits in the connection.
  • Connect with a third-party provider: Metrics are available for the cross-connect group (LAG) and virtual circuits in the connection. Metrics for cross-connects will be available in a future release.
  • Colocate with Oracle: Metrics are available for the cross-connect group (LAG) and virtual circuits in the connection. Metrics for cross-connects will be available in a future release.

A cross-connect group (LAG) contains one or more cross-connects. If there are multiple and one goes down, the cross-connect group stays up, but the group might experience a lower overall bandwidth.

Required IAM Policy

To monitor resources, you must be granted the required type of access in a policy  written by an administrator, whether you're using the Console or the REST API with an SDK, CLI, or other tool. The policy must give you access to the monitoring services as well as the resources being monitored. If you try to perform an action and get a message that you don't have permission or are unauthorized, contact the administrator to find out what type of access you were granted and which compartment  you need to work in. For more information about user authorizations for monitoring, see IAM Policies.

Available Metrics: oci_fastconnect

The metrics listed in the following table are automatically available for each virtual circuit or cross-connect group that you create. You do not need to enable monitoring to get these metrics.

You also can use the Monitoring service to create custom queries. See Building Metric Queries.

Each metric includes the following dimensions: 

COMPONENT
Possible values are crossconnectgroup, crossconnect, and virtualcircuit. If you connect through an Oracle partner, only the virtualcircuit component is available.
RESOURCEID
The OCID  of the resource (either a cross-connect group, cross-connect, or virtual circuit).
RESOURCENAME
The name given to the resource.
Metric Metric Display Name Unit Description Dimensions
BitsReceived Bits Received

Bits

Number of bits received on the FastConnect interface at the Oracle end of the connection.

For a cross-connect group (LAG), the value is the sum across all cross-connects in the group.

component

resourceId

resourceName

BitsSent Bits Sent

Bits

Number of bits sent from the FastConnect interface at the Oracle end of the connection.

For a cross-connect group (LAG), the value is the sum across all cross-connects in the group.
BytesReceived Bytes Received

Bytes

Number of bytes received on the FastConnect interface at the Oracle end of the connection.

For a cross-connect group (LAG), the value is the sum across all cross-connects in the group.
BytesSent Bytes Sent

Bytes

Number of bytes sent from the FastConnect interface at the Oracle end of the connection.

For a cross-connect group (LAG), the value is the sum across all cross-connects in the group.
ConnectionState Connection State

Binary (1 or 0)

The values are up (1) or down (0).

For a virtual circuit, the operational state of the virtual circuit's interface.

For a cross-connect group, this reflects the overall operational state of the cross-connects that make up the cross-connect group (LAG). If at least one of the cross-connects is up, this value is up (1). If all the cross-connects in the group are down, this value is down (0).

PacketsError Packets with Errors

Packets

Number of packets dropped at the Oracle end of the connection. Dropped packets indicate a misconfiguration in some part of the overall system. Check if there's been a change to the configuration of your VCN, the virtual circuit, or your CPE.

For a cross-connect group (LAG), the value is the sum across all cross-connects in the group.
PacketsDiscarded Packets Discarded Packets Number of packets discarded at the Oracle end of the connection.
PacketsReceived Packets Received

Packets

Number of packets received on the FastConnect interface at the Oracle end of the connection.

For a cross-connect group (LAG), the value is the sum across all cross-connects in the group.
PacketsSent Packets Sent

Packets

Number of packets sent from the FastConnect interface at the Oracle end of the connection.

For a cross-connect group (LAG), the value is the sum across all cross-connects in the group.
Ipv4BgpSessionState IPv4 BGP Session State Binary (1 or 0) The values are up (1) or down (0). The status of the IPv4 BGP session for a virtual circuit.
Ipv6BgpSessionState IPv6 BGP Session State Binary (1 or 0) The values are up (1) or down (0). The status of the IPv6 BGP session for a virtual circuit.

Using the Console

The instructions depend on which FastConnect connectivity model you use.

If You Use an Oracle Partner

To view default metric charts for a single FastConnect connection
  1. Open the navigation menu and click Networking. Under Customer connectivity, click FastConnect.
  2. Click the connection you're interested in.
  3. The default metrics charts for the connection's virtual circuit are displayed on the resulting page.

For more information about monitoring metrics and using alarms, see Overview of Monitoring. For information about notifications for alarms, see Overview of Notifications.

To view default metric charts for all FastConnect connections in a compartment
  1. Open the navigation menu and click Observability & Management. Under Monitoring, click Service Metrics.
  2. For Compartment, select the compartment that you're interested in.

  3. For Metric namespace, select oci_fastconnect.

    The Service Metrics page dynamically updates the page to show charts for each metric that is emitted by the selected metric namespace.

If there are multiple FastConnect connections in the compartment, by default the charts show a separate line for each one (each virtual circuit).

For more information about monitoring metrics and using alarms, see Overview of Monitoring. For information about notifications for alarms, see Overview of Notifications.

If You Use a Third-Party Provider or Colocate with Oracle

In this situation, you manage both the physical connection (cross-connects) and logical connection (virtual circuit).

For the physical connection, metrics are available for the cross-connect group (LAG), but not the individual cross-connects. If you are using only a single cross-connect with no cross-connect group, then no metrics are available for the physical connection.

For the logical connection, metrics are available for each virtual circuit.

To view default metric charts for a single FastConnect connection
  1. Open the navigation menu and click Networking. Under Customer connectivity, click FastConnect.
  2. Click the connection you're interested in.

  3. View the metrics for the resource you're interested in:

    • For a cross-connect group: Under Resources, click Metrics. The default metrics charts are displayed on the resulting page.

    • For a virtual circuit:

      1. Under Resources, click Virtual Circuits.

      2. Click the virtual circuit you're interested in. If it's a private virtual circuit, the default metrics charts are displayed on the resulting page. If it's a public virtual circuit, click Metrics to view the charts.

For more information about monitoring metrics and using alarms, see Overview of Monitoring. For information about notifications for alarms, see Overview of Notifications.

To view default metric charts for all FastConnect connections in a compartment
  1. Open the navigation menu and click Observability & Management. Under Monitoring, click Service Metrics.
  2. For Compartment, select the compartment that you're interested in.

  3. For Metric namespace, select oci_fastconnect.

    The Service Metrics page dynamically updates the page to show charts for each metric emitted by the selected metric namespace.

By default the charts show a separate line for each resource in the compartment (each cross-connect group and virtual circuit).

For more information about monitoring metrics and using alarms, see Overview of Monitoring. For information about notifications for alarms, see Overview of Notifications.