create-patch-generic-artifact-details

Description

Creates a new Patch.

Usage

oci fleet-apps-management fleet-apps-management-operations patch create-patch-generic-artifact-details [OPTIONS]

Required Parameters

--artifact-details-artifact [complex type]

This is a complex type whose value must be valid JSON. The value can be provided as a string on the command line or passed in as a file using the file://path/to/file syntax.

The --generate-param-json-input option can be used to generate an example of the JSON which must be provided. We recommend storing this example in a file, modifying it as needed and then passing it back in via the file:// syntax.

--compartment-id, -c [text]

OCID of the compartment to which the resource belongs to.

--name [text]

A user-friendly name. Should be unique within the tenancy, and cannot be changed after creation. Avoid entering confidential information.

--patch-type [complex type]

This is a complex type whose value must be valid JSON. The value can be provided as a string on the command line or passed in as a file using the file://path/to/file syntax.

The --generate-param-json-input option can be used to generate an example of the JSON which must be provided. We recommend storing this example in a file, modifying it as needed and then passing it back in via the file:// syntax.

--product [complex type]

This is a complex type whose value must be valid JSON. The value can be provided as a string on the command line or passed in as a file using the file://path/to/file syntax.

The --generate-param-json-input option can be used to generate an example of the JSON which must be provided. We recommend storing this example in a file, modifying it as needed and then passing it back in via the file:// syntax.

--severity [text]

Patch Severity.

Accepted values are:

CRITICAL, HIGH, LOW, MEDIUM
--time-released [datetime]

Date when the patch was released.

The following datetime formats are supported:

UTC with microseconds

Format: YYYY-MM-DDTHH:mm:ss.ssssssTZD
Example: 2017-09-15T20:30:00.123456Z

UTC with milliseconds
***********************
.. code::

    Format: YYYY-MM-DDTHH:mm:ss.sssTZD
    Example: 2017-09-15T20:30:00.123Z

UTC without milliseconds
**************************
.. code::

    Format: YYYY-MM-DDTHH:mm:ssTZD
    Example: 2017-09-15T20:30:00Z

UTC with minute precision
**************************
.. code::

    Format: YYYY-MM-DDTHH:mmTZD
    Example: 2017-09-15T20:30Z

Timezone with microseconds

Format: YYYY-MM-DDTHH:mm:ssTZD
Example: 2017-09-15T12:30:00.456789-08:00, 2017-09-15T12:30:00.456789-0800

Timezone with milliseconds
***************************
.. code::

    Format: YYYY-MM-DDTHH:mm:ssTZD
    Example: 2017-09-15T12:30:00.456-08:00, 2017-09-15T12:30:00.456-0800

Timezone without milliseconds
*******************************
.. code::

    Format: YYYY-MM-DDTHH:mm:ssTZD
    Example: 2017-09-15T12:30:00-08:00, 2017-09-15T12:30:00-0800

Timezone with minute precision
*******************************
.. code::

    Format: YYYY-MM-DDTHH:mmTZD
    Example: 2017-09-15T12:30-08:00, 2017-09-15T12:30-0800

Short date and time
********************
The timezone for this date and time will be taken as UTC (Needs to be surrounded by single or double quotes)

.. code::

    Format: 'YYYY-MM-DD HH:mm' or "YYYY-MM-DD HH:mm"
    Example: '2017-09-15 17:25'

Date Only
**********
This date will be taken as midnight UTC of that day

.. code::

    Format: YYYY-MM-DD
    Example: 2017-09-15

Epoch seconds
**************
.. code::

    Example: 1412195400

Optional Parameters

--defined-tags [complex type]

Defined tags for this resource. Each key is predefined and scoped to a namespace. Example: {“foo-namespace”: {“bar-key”: “value”}} This is a complex type whose value must be valid JSON. The value can be provided as a string on the command line or passed in as a file using the file://path/to/file syntax.

The --generate-param-json-input option can be used to generate an example of the JSON which must be provided. We recommend storing this example in a file, modifying it as needed and then passing it back in via the file:// syntax.

--dependent-patches [complex type]

Dependent Patches for this patch.

This option is a JSON list with items of type DependentPatchDetails. For documentation on DependentPatchDetails please see our API reference: https://docs.cloud.oracle.com/api/#/en/fleetappsmanagementoperations/20230831/datatypes/DependentPatchDetails. This is a complex type whose value must be valid JSON. The value can be provided as a string on the command line or passed in as a file using the file://path/to/file syntax.

The --generate-param-json-input option can be used to generate an example of the JSON which must be provided. We recommend storing this example in a file, modifying it as needed and then passing it back in via the file:// syntax.

--description [text]

A user-friendly description. To provide some insight about the resource. Avoid entering confidential information.

--freeform-tags [complex type]

Simple key-value pair that is applied without any predefined name, type or scope. Exists for cross-compatibility only. Example: {“bar-key”: “value”} This is a complex type whose value must be valid JSON. The value can be provided as a string on the command line or passed in as a file using the file://path/to/file syntax.

The --generate-param-json-input option can be used to generate an example of the JSON which must be provided. We recommend storing this example in a file, modifying it as needed and then passing it back in via the file:// syntax.

--from-json [text]

Provide input to this command as a JSON document from a file using the file://path-to/file syntax.

The --generate-full-command-json-input option can be used to generate a sample json file to be used with this command option. The key names are pre-populated and match the command option names (converted to camelCase format, e.g. compartment-id –> compartmentId), while the values of the keys need to be populated by the user before using the sample file as an input to this command. For any command option that accepts multiple values, the value of the key can be a JSON array.

Options can still be provided on the command line. If an option exists in both the JSON document and the command line then the command line specified value will be used.

For examples on usage of this option, please see our “using CLI with advanced JSON options” link: https://docs.cloud.oracle.com/iaas/Content/API/SDKDocs/cliusing.htm#AdvancedJSONOptions

--max-wait-seconds [integer]

The maximum time to wait for the resource to reach the lifecycle state defined by --wait-for-state. Defaults to 1200 seconds.

--wait-for-state [text]

This operation creates, modifies or deletes a resource that has a defined lifecycle state. Specify this option to perform the action and then wait until the resource reaches a given lifecycle state. Multiple states can be specified, returning on the first state. For example, --wait-for-state SUCCEEDED --wait-for-state FAILED would return on whichever lifecycle state is reached first. If timeout is reached, a return code of 2 is returned. For any other error, a return code of 1 is returned.

Accepted values are:

ACTIVE, DELETED, DELETING, FAILED, INACTIVE, UPDATING
--wait-interval-seconds [integer]

Check every --wait-interval-seconds to see whether the resource has reached the lifecycle state defined by --wait-for-state. Defaults to 30 seconds.

Example using required parameter

Copy and paste the following example into a JSON file, replacing the example parameters with your own.

    oci fleet-apps-management fleet-apps-management-operations patch create-patch-generic-artifact-details --generate-param-json-input artifact-details-artifact > artifact-details-artifact.json
    oci fleet-apps-management fleet-apps-management-operations patch create-patch-generic-artifact-details --generate-param-json-input patch-type > patch-type.json
    oci fleet-apps-management fleet-apps-management-operations patch create-patch-generic-artifact-details --generate-param-json-input product > product.json

Copy the following CLI commands into a file named example.sh. Run the command by typing “bash example.sh” and replacing the example parameters with your own.

Please note this sample will only work in the POSIX-compliant bash-like shell. You need to set up the OCI configuration and appropriate security policies before trying the examples.

    export compartment_id=<substitute-value-of-compartment_id> # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/fleet-apps-management/fleet-apps-management-operations/patch/create-patch-generic-artifact-details.html#cmdoption-compartment-id
    export name=<substitute-value-of-name> # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/fleet-apps-management/fleet-apps-management-operations/patch/create-patch-generic-artifact-details.html#cmdoption-name
    export severity=<substitute-value-of-severity> # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/fleet-apps-management/fleet-apps-management-operations/patch/create-patch-generic-artifact-details.html#cmdoption-severity
    export time_released=<substitute-value-of-time_released> # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/fleet-apps-management/fleet-apps-management-operations/patch/create-patch-generic-artifact-details.html#cmdoption-time-released

    oci fleet-apps-management fleet-apps-management-operations patch create-patch-generic-artifact-details --artifact-details-artifact file://artifact-details-artifact.json --compartment-id $compartment_id --name $name --patch-type file://patch-type.json --product file://product.json --severity $severity --time-released $time_released