Identifying the Device Software Version

You can identify the Roving Edge Device software version using the Device Console or the Serial Console.

Using the Device Console

  1. Sign in to the Device Console.

  2. Perform one of the following actions:

    • In the navigation menu, click Node Management, then click Nodes.

      The version is displayed in the Version column.

    • Click the System Status icon (System Status Icon) in the upper right corner.

      The version is displayed under System Upgrades.

Using the Serial Console

Prerequisites

You must have a controlling host, such as a laptop connected to the device serial port (see Cable the Roving Edge Device) and have terminal emulation configured (see Set Up Terminal Emulation).

For information about the serial console menu, see Operating the Serial Console.

  1. In your terminal emulation utility, with the main menu displayed, select 4) Show Status.

    The version is listed in the device status output:

         Roving Edge Device
       -----------------------
    
    1) Unlock Device
    2) Change Passphrase
    3) Configure Networking
    4) Show Status
    5) Show System Diagnostics
    6) Shutdown Device
    7) Reboot Device
    8) Enter Safe-Mode
    9) Exit Safe-Mode
    10) Shred Key
    11) Recover Key
    12) Reset Device
    13) Advanced Menu
    14) Cluster Health
    15) Node Health
    16) Diagnostics
    17) Help
    
           Device Status:
    
    Version                    : 2.14.0.20240812082011
    System Time UTC            : 2024-08-19 21:20:37
    Boot Time                  : 2024-08-12 08:46:01
    Device Serial Id           : vm1-bm-xyz
    Unlock Status              : UNLOCKED
    Auto Unlock Status         : Disabled
    Diag Mode                  : Disabled
    red-1 API Services Status  : All Services Are Available
    red-1 HW Services Status   : All Services Are Available
    Press ENTER to return...