Package com.oracle.bmc.vnmonitoring.model

Class UpdateIPSecTunnelBgpSessionDetails.Builder

    • Constructor Detail

      • Builder

        public Builder()

    • Method Detail

      • oracleInterfaceIp

        public UpdateIPSecTunnelBgpSessionDetails.Builder oracleInterfaceIp​(String oracleInterfaceIp)
        The IP address for the Oracle end of the inside tunnel interface.

        If the tunnel's routing attribute is set to BGP (see updateIPSecConnectionTunnelDetails), this IP address is used for the tunnel's BGP session.

        If routing is instead set to STATIC, you can set this IP address to troubleshoot or monitor the tunnel.

        The value must be a /30 or /31.

        If you are switching the tunnel from using BGP dynamic routing to static routing and want to remove the value for oracleInterfaceIp, you can set the value to an empty string.

        Example: 10.0.0.4/31

        Parameters:
        oracleInterfaceIp - the value to set
        Returns:
        this builder

      • customerInterfaceIp

        public UpdateIPSecTunnelBgpSessionDetails.Builder customerInterfaceIp​(String customerInterfaceIp)
        The IP address for the CPE end of the inside tunnel interface.

        If the tunnel's routing attribute is set to BGP (see updateIPSecConnectionTunnelDetails), this IP address is used for the tunnel's BGP session.

        If routing is instead set to STATIC, you can set this IP address to troubleshoot or monitor the tunnel.

        The value must be a /30 or /31.

        If you are switching the tunnel from using BGP dynamic routing to static routing and want to remove the value for customerInterfaceIp, you can set the value to an empty string.

        Example: 10.0.0.5/31

        Parameters:
        customerInterfaceIp - the value to set
        Returns:
        this builder

      • oracleInterfaceIpv6

        public UpdateIPSecTunnelBgpSessionDetails.Builder oracleInterfaceIpv6​(String oracleInterfaceIpv6)
        The IPv6 address for the Oracle end of the inside tunnel interface.

        This IP address is optional.

        If the tunnel's routing attribute is set to BGP (see IPSecConnectionTunnel), this IP address is used for the tunnel's BGP session.

        If routing is instead set to STATIC, you can set this IP address to troubleshoot or monitor the tunnel.

        Only subnet masks from /64 up to /127 are allowed.

        Example: 2001:db8::1/64

        Parameters:
        oracleInterfaceIpv6 - the value to set
        Returns:
        this builder

      • customerInterfaceIpv6

        public UpdateIPSecTunnelBgpSessionDetails.Builder customerInterfaceIpv6​(String customerInterfaceIpv6)
        The IPv6 address for the CPE end of the inside tunnel interface.

        This IP address is optional.

        If the tunnel's routing attribute is set to BGP (see IPSecConnectionTunnel), this IP address is used for the tunnel's BGP session.

        If routing is instead set to STATIC, you can set this IP address to troubleshoot or monitor the tunnel.

        Only subnet masks from /64 up to /127 are allowed.

        Example: 2001:db8::1/64

        Parameters:
        customerInterfaceIpv6 - the value to set
        Returns:
        this builder

      • customerBgpAsn

        public UpdateIPSecTunnelBgpSessionDetails.Builder customerBgpAsn​(String customerBgpAsn)
        The BGP ASN of the network on the CPE end of the BGP session.

        Can be a 2-byte or 4-byte ASN. Uses “asplain” format.

        If you are switching the tunnel from using BGP dynamic routing to static routing, the customerBgpAsn must be null.

        Example: 12345 (2-byte) or 1587232876 (4-byte)

        Parameters:
        customerBgpAsn - the value to set
        Returns:
        this builder